Animated loader dots14ComingSoonAnimated loader dots

Plynové riešenia procesu zvárania

Vyberte si optimálny zvárací plyn pre vašu aplikáciu pomocou nášho nástroja na výber.

 

 

 

 

Nájdite svoj optimálny zvárací plyn

Hľadáte zvárací plyn na zvýšenie produktivity a zisku, ako aj na zabezpečenie kvality zvaru? Použite náš jednoduchý nástroj na výber plynu. Prípadne pre všeobecné otázky alebo pre získanie cenovej ponuky pre väčšie objemy nám zavolajte na 0800 3890202 alebo vyplňte kontaktný formulár tu.

Nájdite svoj optimálny zvárací plyn

Náš najlepší plyn

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Ďalšie odporúčania

Alumaxx Plus Integra

M21ArC18

M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Tiež vhodné

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Používané v určitých aplikáciách

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

Alumaxx Plus Standard

M20ArC15

M20ArC15 weld process gas meeting the requirements of ISO14175:M20, contains 15% Carbon dioxide in Argon. Suited for MAG welding of carbon steels.

Used in Certain Applications

Our Best Gas

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

Alumaxx Plus Standard

M20ArC15

M20ArC15 weld process gas meeting the requirements of ISO14175:M20, contains 15% Carbon dioxide in Argon. Suited for MAG welding of carbon steels.

Alumaxx Plus Integra

M21ArC18

M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Alumaxx Plus Standard

M20ArC15

M20ArC15 weld process gas meeting the requirements of ISO14175:M20, contains 15% Carbon dioxide in Argon. Suited for MAG welding of carbon steels.

Used in Certain Applications

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Alumaxx Plus Standard

M20ArC15

M20ArC15 weld process gas meeting the requirements of ISO14175:M20, contains 15% Carbon dioxide in Argon. Suited for MAG welding of carbon steels.

Alumaxx Plus Integra

M21ArC18

M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Our Best Gas

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

Alumaxx Plus Standard

M20ArC15

M20ArC15 weld process gas meeting the requirements of ISO14175:M20, contains 15% Carbon dioxide in Argon. Suited for MAG welding of carbon steels.

Used in Certain Applications

Our Best Gas

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

We Also Recommend

Alumaxx Plus Integra

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

Alumaxx Plus Standard

M20ArC15

M20ArC15 weld process gas meeting the requirements of ISO14175:M20, contains 15% Carbon dioxide in Argon. Suited for MAG welding of carbon steels.

Alumaxx Plus Integra

M21ArC18

M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

We Also Recommend

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Also Suitable

Alumaxx Plus Integra

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Alumaxx Plus Standard

M20ArC15

M20ArC15 weld process gas meeting the requirements of ISO14175:M20, contains 15% Carbon dioxide in Argon. Suited for MAG welding of carbon steels.

Used in Certain Applications

Our Best Gas

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

We Also Recommend

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Also Suitable

Alumaxx Plus Standard

M20ArC15

M20ArC15 weld process gas meeting the requirements of ISO14175:M20, contains 15% Carbon dioxide in Argon. Suited for MAG welding of carbon steels.

Alumaxx Plus Integra

M21ArC18

M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Náš najlepší plyn

Tiež vhodné

Alumaxx Plus Integra

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Používané v určitých aplikáciách

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Backing Gas - Our Best Gas

Backing Gas-Also Suitable

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our Best Gas

Alumaxx Plus Integra

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

We Also Recommend

Also Suitable

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Používané v určitých aplikáciách

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our Best Gas

Alumaxx Plus Integra

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

We Also Recommend

Alumaxx Plus Standard

I3ArHe30

I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Also Suitable

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our Best Gas

Alumaxx Plus Integra

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

We Also Recommend

Also Suitable

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

our best gas

Alumaxx Plus Integra

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Tiež vhodné

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Náš najlepší plyn

Alumaxx Plus Integra

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Ďalšie odporúčania

Backing Gas - Our Best Gas

Náš najlepší plyn

Alumaxx Plus Integra

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Tiež vhodné

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Used in Certain Applications

Helium Standard

Helium

An inert gas, technical Helium is used for lifting (airships and balloons), as well as for leak detection, optical fibre production, and as a shielding gas for welding. It is the preferred shielding gas for high power laser welding. Its high thermal conductivity produces welds with an excellent aspect ratio. Its high ionisation potential results in good plasma suppression and high weld speeds.

Backing Gas - Our Best Gas

Náš najlepší plyn

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Ďalšie odporúčania

Alumaxx Plus Integra

M21ArC18

M21ArC18 weld process gas meeting the requirements of ISO14175:M21, contains 18% Carbon Dioxide in Argon. Used for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Tiež vhodné

Alumaxx Plus Integra

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Používané v určitých aplikáciách

Náš najlepší plyn

Alumaxx Plus Standard

Inomaxx® Plus

Inomaxx® Plus (M12ArHeC35/2) weld process gas meeting the requirements of ISO14175:M12, contains 35% Helium and 2% Carbon Dioxide in Argon. Our best gas for stainless steel welding all material thicknesses on dip, spray and pulse transfer. Stable arc conditions offer all-positional capability.

Ďalšie odporúčania

Alumaxx Plus Integra

Inomaxx® 2

Inomaxx® 2 (M12ArC2) weld process gas meeting the requirements of ISO14175:M12, contains 2% Carbon Dioxide in Argon. Our ideal all-rounder for MAG welding stainless steel is highly suited to pulsed arc transfer, offering superior weld properties. For welding thin and medium thickness Ferritic and Austenitic stainless steel in dip, spray and pulse transfer modes.

Tiež vhodné

Používané v určitých aplikáciách

Alumaxx Plus Standard

M22ArO4

96% Ar / 4% O₂ M22ArO5 weld process gas meeting the requirements of ISO14175:M22, contains 4% Oxygen in Argon. Used for automated / robotic MAG welding of carbon steels.

Náš najlepší plyn

Alumaxx Plus Standard

Inomaxx® Plus

Inomaxx® Plus (M12ArHeC35/2) weld process gas meeting the requirements of ISO14175:M12, contains 35% Helium and 2% Carbon Dioxide in Argon. Our best gas for stainless steel welding all material thicknesses on dip, spray and pulse transfer. Stable arc conditions offer all-positional capability.

Ďalšie odporúčania

Alumaxx Plus Integra

Inomaxx® 2

Inomaxx® 2 (M12ArC2) weld process gas meeting the requirements of ISO14175:M12, contains 2% Carbon Dioxide in Argon. Our ideal all-rounder for MAG welding stainless steel is highly suited to pulsed arc transfer, offering superior weld properties. For welding thin and medium thickness Ferritic and Austenitic stainless steel in dip, spray and pulse transfer modes.

Používané v určitých aplikáciách

Alumaxx Plus Standard

M22ArO4

96% Ar / 4% O₂ M22ArO5 weld process gas meeting the requirements of ISO14175:M22, contains 4% Oxygen in Argon. Used for automated / robotic MAG welding of carbon steels.

Náš najlepší plyn

Alumaxx Plus Standard

Inomaxx® Plus

Inomaxx® Plus (M12ArHeC35/2) weld process gas meeting the requirements of ISO14175:M12, contains 35% Helium and 2% Carbon Dioxide in Argon. Our best gas for stainless steel welding all material thicknesses on dip, spray and pulse transfer. Stable arc conditions offer all-positional capability.

Ďalšie odporúčania

Alumaxx Plus Integra

Inomaxx® 2

Inomaxx® 2 (M12ArC2) weld process gas meeting the requirements of ISO14175:M12, contains 2% Carbon Dioxide in Argon. Our ideal all-rounder for MAG welding stainless steel is highly suited to pulsed arc transfer, offering superior weld properties. For welding thin and medium thickness Ferritic and Austenitic stainless steel in dip, spray and pulse transfer modes.

Používané v určitých aplikáciách

Alumaxx Plus Standard

M22ArO4

96% Ar / 4% O₂ M22ArO5 weld process gas meeting the requirements of ISO14175:M22, contains 4% Oxygen in Argon. Used for automated / robotic MAG welding of carbon steels.

Náš najlepší plyn